T-9 Handheld Micro Ohmmeters

T-9 Handheld Micro Ohmmeters
Product introduction

Product Introduction ■T-9 is a handheld loop resistancetester powered by batteries,utilizing the most advanced technology.It is capable of testing circuit breakercontacts,busbar connections,and high-current connections .Addltionally,it can beused in any high precision,low resistance testing scenarios

■T-9 is a handheld loop resistancetester powered by batteries,utilizing the most advanced technology.It is capable of testing circuit breakercontacts,busbar connections,and high-current connections .Addltionally,it can beused in any high precision,low resistance testing scenarios

■T-9 is ideally suited for feld and factory environments.The simple control panel design makes the device particularly easy tooperate.The user only needs to follow the instructions to wire thedevice and click the test button to generate test results.

■T-9 is different from the current micro-ohmmeters on the market,it can automatically and steadily output ripple-freecurrent to ensure accurate test results

■T-9's internal storage unit can store more than 1,000 sets of test data,and the data can be transferred from the device to thephone and PC,where the user can check the test data directly onthe phone.

■The high-capacity Li-Po battery(8000 mAh)enables T-9 to pe rform continuous loop resistance testing while generating up to 250A DC ripple-free current,which makng the device suitable formany different operating scenarios.


Display TFT
Indicators Warning
Measuring Range multi-range.
resolution Ω to 2000 mΩ,
Accuracy ±(0.5%of reading+1 digits)for 0.1μQ to 2000 μΩ
Test Current minimum at 230A
Memory(Record) 2 GB SD caed which can memory 1000 measurements
Power supply single-phase 210-230V AC,50Hz
Weight 0.86kg
Battery Battery can operate more than 100 times at 100A and 0.1s
Recharge time 4.5h
Operating temperature -10℃-+55C/+140F-+131F
Relative humidity 5%-95%
Protection Standard P54(only facility)IP67(with facility case)
Accessories 1.Power cord and plug or adapter
2.Lead set,comprising of:
2.1 One (1)current and sense leads with Kelvin clamp,not
less than 1.3 meters(red colour)
2.2 One(1)current and sense leads with Kelvin clamp,not
less than 3meters(black colour)
2.3 Two(2)current and sense leads with Kelvin probes,not
less than 1.3meters
4.Suitcase
5.Instruction manual
6.Standard resistance 250 μΩ


Circuit Breaker Test
▪ Circuit breaker contact testing
▪ Circuit breaker connection testing
Busbar testing
▪ Busbar connection point test
▪ Connection test
▪ All high current occasions for testing resistance
▪ Switch
▪ Lsolation device
▪ Safety ground connection
▪ Welding spot
▪ Fuse wire
▪ Cable
RELATED PRODUCTS